You own a budget mountain bike that definitely saved you a good amount and the seat clamps are also pretty good in quality.
However, there are cheaper models that don’t come with that flexibility. And having a poor quality quick-release seat clamp will downgrade the comfort factor as you’ll keep struggling to have a secure seat.
Even if you are all geared with super comfy padded cycling tights and fantastic pairs of riding shoes, the comfort factor will be still missing. Solution? You’ll need new ones. And once you get them, you want to check how to install a Quick Release seat clamp, let’s help you there.
What We Will Cover
Exactly How to Install a Quick Release Seat Clamp?
You just need a couple of tools, prep your seat post, and fix the clamp on your frame with some seat height adjustment to get the quick-release clamp on your bike. If the previous one is an integrated quick-release seat clamp, you won’t be able to remove it and install new ones.
You may want to replace quick release seat with bolts as it’s already worn out. And so, need the clamps to go out as well. One thing that you should check during this phase is if the lever is allowing an ideal adjustment point.
And that’s when you should think about a lever replacement. Usually, with inexpensive bikes, you are going to get pretty poor-quality quick-release clamps. And these are not good at all for holding well.
Getting the Best Quick Release Seatpost Clamp will solve half of the adjustment problems you are having, while with lever replacement you should be able to get the seat positioned on the ideal spot.
Things You’ll Need for The Quick Release Seat Clamp Installation.
- You would require a Hex torque wrench for this process. Try MARQUE Adjustable Bike Torque Wrench.
- Also, some carbon paste or grease. The MG Chemicals Carbon Conductive Grease is a great one.
Get Your Seat Post-Ready for The Installation.
This is a great step to keep included if you own a seatpost and frame made of steel or aluminum. However, for the ones that are of carbon fiber, you don’t have to apply any sort of grease.
Preparing it with carbon paste will be the best option. However, you should not ignore checking the manufacturer’s recommendation on the frame and Seatpost, in case they have specific notes on what to not apply and its incudes the paste.
Other than that, it’s a go-to choose for preparing the Seatpost for clamp installation.
Installing The Clamp-On Frame.
You want to make sure that the lineup on the slot with frame and clamp is done right. The inside liner that stays in the clamp should be completely nesting on the seat tube. If not, you want to adjust it that way.
The installation method could be a little different depending on the quick-release seat clamp model you’re using. So, it’s always a good idea to shortly check the manual given instructions as well.
Getting Your Preferred Height.
Once you have the clamps on, it’s time to have the seatpost to your preferred height. Now if you don’t know anything about it, then simply choose to keep it somewhere on the middle. Get the torque set as you’ll have to readjust.
The lever of the clamp needs to be flipped for closing it. There could be bolts that need to be loose enough if you cannot easily close by flipping.
You need to keep the specs of the frame and seatpost as a guide in this case. A 4mm hex torque wrench should work. Also, keep in mind that you should not go beyond 6 nm.
You have to also set quite low if you’re using a dropper post or carbon seatpost. Otherwise, there’s a chance of binding or crushing material.
Once you have set the torque, adjusting the height hold be easy. And that’s how to install a bike seat clamp, which is a quick-release type.
You Can’t Remove Integrated-In-Frame Type of Quick Release Clamp.
This is mostly the case with some old models of bikes. And here the seatpost clamp is basically integrated into the bike frame. As a permanent part of the frame. There’s no opening for the quick-release skewer.
And that’s why you won’t be able to replace such specifically built-in quick-release clamps. However it is possible to just replace or remove the lever if that supports your removal cause. If not, you’ll just have to give up on the idea of clamp removal.
Frequently Asked Question
1. How does a seat clamp work?
Just around the tube top is where the seat post clamps go. And there are bolts that tighten so that the frame material can slightly flex. There’s a slot for letting the flex happen. And all of that combinedly worse for tightening against seat post. Which will make the post-stay in place.
2. How do you tighten a quick release seat clamp?
There should be an adjustable knob for the tightening. You should look for it on the quick release lever’s opposite side. Open it and then turning the knob clockwise will allow you to make the necessary adjustments.
If you’re trying to find about 2 bolt saddle clamp adjustment, it basically needs alteration a little at a time. You must keep on reaching the level by making both bolts time. And keep on going until the angle is right.
3. What is a seat post clamp?
At the top of the seat tube, there’s a metal collar with a circular shape and it’s called a seat post clamp. It basically prevents the saddle from moving and keeping the post in the spot. Quick-release is one of the most popular bike saddle clamp types.
Conclusion
And that was all about how to install a Quick Release seat clamp as well as answers to some questions that I receive a lot. Hopefully, this guide was able to give you some insight into the installation. Now go ahead and get the seat clamp installed to basically enjoy all your rides with a more secure, and comfortable seat.